I recently worked with a customer who was trying to cool some small part housings after they leave a wash system. The parts are currently placed in a wash tray where they travel down a conveyor belt and into the washer where they are heated to around 160°F. As the parts exit the washer, the belt is stopped so the parts can be left to cool before an operator places the parts into their dryer system. This cooling process was taking about 15 minutes before the operator was able to safely handle the parts. This cooling delay was negatively affecting their production cycle. They were looking to eliminate the 15 minute cooling cycle by incorporating some type of air cooling system so the parts could be quickly processed to the dryer. They wanted to standardize on a single device as they manufacturer a variety of part shapes with the largest being a valve housing that measures close to 2″ x 2″.
The customer was able to send a few photos of their parts and after reviewing the information sent, I recommended they use our Model # 3925 Adjustable Spot Cooler System with dual point hose kit. Incorporating a Vortex Tube, the Adjustable Spot Cooler is able to produce cold air temperature as low as -30°F, based on ambient supply temperature. The unit features a temperature control valve that allows for simple adjustments of the temperature of the exhausting cold air as well as the volume of air being discharged. The system includes 2 additional generators which provide more or less airflow volume through the device as well as cooling capacity (Btu/hr.) for even more control. The dual hose kit separates the cold air into two separate airstreams to provide for a wider coverage area or in this particular case, the customer would be able to treat both sides of the housing for even cooling. The magnetic base makes for easy installation without having to make expensive modifications to their existing setup.
EXAIR offers a wide variety of spot cooling products for use in many industrial settings. For help selecting the best product to fit your needs, give me a call, I’d be glad to help.
Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN